Thus, infrared heaters – heaters is that transfer heat to the surrounding objects by means of infrared rays. The surface of objects absorb radiation, heat and then transfer heat to the air. This principle of operation allows significant savings in energy consumption compared with other types of heating systems, where most of the heat goes to heating Ceiling space. Also worth noting, infrared otolenie – this is the only class of heating, which allows you to warm up a point, ie Not fully premises, but only those areas that are required. Moreover, the heat from infrared heaters is felt almost immediately after turning on and little or no loss up to the heated surfaces, which also affects the cost of energy consumption. Infrared carbon heaters have a very broad scope of use – residential, commercial area, shops, gyms and other places of mass attendance, production facilities and warehouses, showrooms, and many others. Along the length of the radiated waves infrarkanye heaters are divided into short-, long wave and medium-wave. It follows from the categories, their main difference is the wavelength, which in turn depends on the temperature of the heated body – the higher the temperature, the shorter the wavelength, and higher intensity.
Long-wave is also called the dark, for the richine that they do not emit light, even when their operating temperature of 300-400 C. Medium-wave work at a maximum temperature of 800 C and emit a soft light, therefore they are called light or white. Infrared heaters are also classified by type of energy consumed by electric, gas and diesel. The researchers note that gas and diesel heaters they are more economical efficiency is 85-92. But they reduce the level of oxygen in the air and reduce humidity in the air. For these reasons, gas and diesel infrared heaters are not recommended use in a residential area. According to the type of heating element infrared heaters are classified by halogen, carbon, and ceramic tenovye infrared heaters. The main heating element halogen infrared heaters is a halogen lamp that emits light in the main stream in the infrared spectrum.
The only disadvantage of halogen heaters is that due to a fall or violent impact vacuum tube can be broken. The infrared heater carboxylic main heating element consists of a carbon-carbon fiber, which is placed in a glass tube. The most important advantage of infrared carbon instruments is lower power consumption compared to other infrared devices heating at about 2-2.5. Among the disadvantages – they can not dry things when reaching 98 C inside the instrument this will protect from overheating. If you fall or bounce probable risk of breaking the quartz tube. In the manufacture of the heating element in the ceramic infrared heater used ceramic tiles, collected in a single reflector. This class of heating systems is based on flameless combustion of the gas-air mixture inside the tile, which it is heated to 850-900? C. After that, heat is transferred surrounding objects, surfaces and people. And infrared heating devices are divided on the place of assembly. On this factor, isolated heaters ceiling, wall, portable floor. Summing up the above, leading advantages of this class of systems of heating are: they do not alter the percentage of moisture in the air and the saturation of oxygen, economical in terms of energy consumption does not cause air circulation in the room and avoiding the draft. In addition, they are easy to install, fast warm up the room, plus everything are the only heaters allows for efficient heating point.